Cognex CVI

AIA Certified Vision Professional

Keyence XG-7000

PPT Vision
PPT Vision

Sick 3D Vision

Banner Vision

View John Salls's profile on LinkedIn

Automation Manufacturers

 

 


Cognex InSight I/O Tester

Guidance, Identification, Gauging, and InspectionOne of the first tasks you must perform when setting up the InSight Vision Systems is to set up and configure the Inputs and Out puts. Once you have the I/O selected from the list (Sensor>Discrete I/O Settings), you need to test the actual physical I/O. You could do this with the built in snippets building your own application. We have created a small application which you can load up to test your I/O.

You must set your system online for the I/O to update. This application will remind you to put the camera online and then you can test your I/O. Inputs appear at the left side of the custom overlay. The Outputs from the camera appear at the right side. You can run this in either Easy Builder or the Spreadsheet view. Simply set the system online, then you can click on the checkboxes for the outputs or view the Inputs status on the left.

This application will change from time to time as we add features. If you have suggestions for the application to improve it, let us know and maybe we'll get it into our next update. Click here to download or on the image above.


Vision ICS, Incorporated | 793 Winterberry Draw | Woodbury, MN 55125
Phone: 651-503-0496 | E-mail: sales@vision-ics.com
All Rights Reserved Copyright 2011 Vision ICS, Inc.